Omnia Audio Omnia.9/XE - Manual (Page 47)

De-clipper Menu
The De-clipper menu contains a single control to set the level of de-clipping in 5 stages. Lower settings
offer more conservative de-clipping action, while higher settings offer more de-clipping.
A setting of Level 5 the “normal” setting and recommended for most modern material which have been
mastered with high levels of compression and clipping. If your station primarily plays source material that
has been cleanly mastered, you may find lower settings are sufficient.
The most effective way to monitor exactly what the de-clipper is doing is to view the pre-de-clipper and
post-de-clipper waveforms side-by-side using Omnia.9/XE’s built-in oscilloscopes.
Density Detector Band Weighting
Each band of Undo’s expander has a corresponding density detector. The Density Detector Band
Weighting controls allow you to determine how much control each detector provides its own band as well
as any other expander band.
The Station Menu - Undo Menu
47