OpenEye SW-RWTCP - Manual (Page 13)

27314AI 13
CONNECTING TO A POS DEVICE
To connect a DVR or NVR to a POS system perform the following steps:
Network Connection
DIGITAL RECORDER SWITCH POS REGISTER
1. Connect the DVR or NVR and the POS System to the same network.
2. Follow the instructions outlined in the Installation and Configuration chapter of this manual for your specific POS System.
RS-232 Connection
POS REGISTER DIGITAL RECORDER
1. Connect the DVR or NVR to the serial output of the POS System or Video Text Inserter using a serial cable and Y-cable if
necessary.
2. Follow the instructions outlined in the Installation and Configuration chapter of this manual for your specific POS System.
RS-232 Connection with Text Inserter
COM NO COM NO TX+ T X- RX+ RX-
TEXT INSE RTER POS REGISTER DIGITAL RECORDER
1. Connect the DVR or NVR to the serial output of the POS System or Video Text Inserter using a serial cable and Y-cable if
necessary.
2. Follow the instructions outlined in the Installation and Configuration chapter of this manual for your specific POS System.