Sundance SMT702 - Manual (Page 62)

7 Software Packages
Here is a list of the software packages that will be required for the SMT702 to work.
•
SMT6300 is the software package that installs the Sundance driver for the
SMT702 board.
•
SMT6002 is the software package that installs the server application to write
into flash memory (this is to store bitstreams and to reboot dynamically the
board). The application is called Flash Utility.
•
SMT7002 is the software package that installs a demo application (smt702
Configuration) for the SMT702 as shown below:
As soon as the application is launched, it reads from the FPGA the board name, type
of FPGA, PCB revision and the firmware version. Once running, status flags are
displayed in the status section as well as the temperature of the FPGA and its
internal voltages (1.0V and 2.5V). A log is available on the right hand side.