Sundance SMT702 User Manual
Page 63
Figure 21 - SMT702 Demo application.
Parameters to configure the clock chip and dcm phase shifts can be loaded
(Hardware selection section – example files are provided in \\Program
Files\Sundance\SMT7026\Host\Smt702Config\Custom_Parameters)
from
a
configuration file, as well as the clock and reference source. Samples can be stored
into DDR2 memory, played back, stored into files and displayed into 2 graphs. The
first one shows the raw samples and the second the FFT of the captured samples
(2048 points). Each captured can be stored into individual files (smt7002_cha.txt or
smt7002_chb.txt) and also a concatenated version of all captures made
(smt7002_total_cha.txt or smt7002_total_chb.txt)
In order to have the software source code for the SMT7002, the SMT7026 package
will have to be purchased. They come as a visual C++ project with all necessary files
to recompile the application and modify it.