Super Systems 9200 User Manual
Page 48
Model 9200 Programmable Dual-loop Controller
SSi Manual SERIES 9200
48 Programmable Dual-loop
folder can be anywhere on the PC, however, it is recommended that the user keep the location of
this folder simple – i.e. directly on the main drive (C:
\
)
. For example, the location “C:\9200 Data\”
is better than “C:\SSi\Devices\9200\Data\”.
5. It is also helpful to include the INTPARMS.x files, chlist.txt file, and any associated chart files
(.CTM) into the selected folder. These files should be located on the installation CD.
6. Open SD Recorder.
7. From
the
Options
menu on SD Recorder, select
Alternate Data
. The user will have to enter the
location of the alternate data, which is the location of the selected folder, i.e. “C:\9200 Data”.
Click the OK button to use the alternate data that was pulled off of the compact flash card.