Super Systems CarbCALC II User Manual
Page 13
CarbCalcII
CarbCalc II
12
© 2005,2006,2007 Super Systems Inc.
2.4.3
Segment Properties Dialog
·
Segment Name - Enter or Edit the Segment Name.
·
Temperature - Enter or Edit the Segment Temperature
·
%Carbon - Enter or Edit the Segment %Carbon.
·
Probe Factor (PF or COF) - Enter or Edit the Probe Factor. Note: for new segments this will default
to the Suggested PF and may be edited.
·
Residual CH4 - Enter or Edit the CH4 (normally 0.0 to 5.0 depending on your furnace).
·
Saturation Carbon - displays saturation carbon level, %Carbon should be set to a value less than
this amount.
·
Suggested Probe Factor (PF or COF) - Theoretical value of the Probe Factor based on Material
selected.
·
End of Segment Method - select the End of Segment type and supply required data as indicated
below.