Super Systems CarbCALC II - Manual (Page 42)

CarbCalcII CarbCalc II 41
© 2005,2006,2007 Super Systems Inc.
2.14 Replay Monitor Mode
2.14.1 Typical Uses
The Replay/Monitor mode may be used to review potential probelms with a load and as an aid in
determining what may have gone wrong. The Replay/Monitor mode may be used in conjunction with
the RealTime control Mode or with Superdata Datalog and a manually maintained Loads Database, or
with BatchMaster Integration using an external Loads database.
Replay Monitor in conjunction with the RealTime Control Mode.
The Replay mode is similar to the RealTime Control Mode. When a Carb Cycle is run in Control
Mode, the following data is saved:
· Load Information - in the CCLoads Database
· Model as run - an "as run" model file is saved under the name "L-xxx-model.ccp" (where xxx=load id
number and model=model name)
· Logged Process data - SuperData Communications historically logged data.
Using this data, the Cycle can be selected from the CCLoads database and may be replayed.
Replay Monitor With SuperData and a Manual Database.
This method is used when the Control Mode is not used. This method requires that the RealTime
Data Sources be configured for each furnace supported. This method also requires that a Load be