Super Systems CarbCALC II - Manual (Page 43)

CarbCalcII CarbCalc II 42
© 2005,2006,2007 Super Systems Inc.
manually entered using the Load Entry Screen. Load Entry must include a Load Start and Load End
time.
· Load Information - manually entered in the CCLoads Database
· Model as run - after the first replay, an "as run" model file is saved under the name
"L-xxx-model.ccp" (where xxx=load id number and model=model name)
· Logged Process data - SuperData Communications historically logged data.
Using this data, the Cycle can be selected from the CCLoads database and may be replayed. During
replay, the recipe will be displayed, but only the total time (not segment times) will be displayed. This
is becaause the actual recipe used in the control instrument is unknown to CarbCalcII; only the logged
data and start/ent times are known.
Replay Monitor With BatchMaster Integration and an External Database.
This method is used when an external Load Entry system and Database are used (e.g with
BatchMaster or other Load Tracking systems). This method requires that the RealTime Data Sources
be configured for each furnace supported. This method also requires that the External Database must
be available through an ODBC DSN and that the carbcalc.ini file be configured for Load Database
access (see configuration section).
· Load Information - obrtained from an external Load Tracking Database
· Model as run - initial replay uses default settings, saving the load settings saves an "as-run" model
file for the load the name "BML-xxx-model.ccp" (where xxx=load id number and model=model
name)