Westermo IDW-90 AT - Manual (Page 43)

43 6620-3200
5.7 List of IDW-90+Configurator commands
The IDW-90+Configuration commands typed in must have the correct syntax and be
complete, including all blanks. Capital/small letter use is not important. The entry is not
case sensitive.
The values in bold are factory defaults. The usage is:
[?] <command>[=parameter]
Example to set the ISDN B channel protocol to X.75:
prot=10
Example to show the selected ISDN protocol:
prot
Example to show all selectable ISDN protocols:
?prot
Some major IDW-90+ commands are shown here as a preview:
show show the normally used parameter
showall show all changeable parameters
quit leave IDW-90+Configurator
help show all available commands
defa setup default parameter set
defa 1 setup factory default parameter set
save store parameter (non volatile)
<cmd>? – More information for one command
Displays the allowed values for one selected command
<cmd>.
Table 4 List of Configurator commands
Configurator Command Description
acctab Isdn access control
atsx, atopt, atrej AT command parameter set
autoreset TA reset option
bc Bearer capability
bod Bandwidth On Demand enable
bodiv BOD increase value
bodit BOD increase timer
boddv BOD decrease value
boddt BOD decrease timer
br Baudrate asynchronous
brn Line baudrate asynchronous V.110
bsize Frame length
catab Automatic call table
cato Call timeout to abort
capa Call pause
catry Calls retry
ccts CTS control
cdcd DCD control