Westermo IDW-90 AT - Manual (Page 77)

77 6620-3200
7.3 X.25 diagnostic codes
Table 7 X.25 diagnostic codes
No. Restart- Clear- Reset- Diag- Meaning
hex ind. ind. ind. nostics
00 X X X – No additional information
01 – – X – Invalid P (S)
02 – – X – Invalid P (R)
10 – – – X Packet type invalid
11 X – PVC X Packet type invalid for state r1
12 X – PVC X Packet type invalid for state r2
13 – – – – Packet type invalid for state r3
14 – X – – Packet type invalid for state p1
15 – X – – Packet type invalid for state p2
16 – X – – Packet type invalid for state p3
17 – X – – Packet type invalid for state p4
18 – X – – Packet type invalid for state p5
19 – X – – Packet type invalid for state p6
1A – X – – Packet type invalid for state p7
1B – – X – Packet type invalid for state d1
1C – – X – Packet type invalid for state d2
1D – – – – Packet type invalid for state d3
20 – – – – Packet not allowed
21 – X PVC – Unidentifiable packet
22 – X – – Call on one-way logical channel
23 – – PVC – Packet type invalid for state at PVC
24 – X – X Packet on unassigned logical channel
25 – – X – Reject not subscribed to
26 X X X – Packet too short
27 X X X – Packet too long
28 – X – X Invalid general format identifier
29 – X X X Restart or registration packet »0«
2A – X – – Packet type not compatible with facility
2B – – X – Unauthorized interrupt conformation
2C – – X – Unauthorized interrupt
2C – – X – Unauthorized reject
30 – – – – Time expired:
31 – X – – • for incoming call
32 – – – X • For clear indication
33 – X PVC – • For reset indication
34 X – – X • For restart indication
35 X – – X • For call deflection
40 – X – – Call set-up, call clearing or registration problem
41 – X – – Facility/registration code not allowed
42 – X – – Facility parameter not allowed
43 – X – – Invalid called DTE address