Alinco DJ-A10 - Manual (Page 28)

Professional
FM Transceiver
10
Press【A】Key to move cursor to the menu
Press【B】/【C】key to choose the value
LCD backlight color selection:
BLUE: Blue backlight
ORG: Orange backlight
PUR: Purple backlight
【 D 】 / 【 # 】 50
Press【A】Key to move cursor to the menu
Press【B】/【C】key to choose the value Scan resume time setting:
3 parameters: 5 seconds / 10 seconds / 15 seconds
【 D 】 / 【 # 】 50
Press【A】Key to move cursor to the menu
Press【B】/【C】key to choose the value
Display mode: (May be preprogrammed by dealer and
locked)
FREQ: Frequency and Channel display
CH: Channel display
NAME: Channel number with name-tag display if
programmed
【 D 】 / 【 # 】 51
Press【A】Key to move cursor to the menu
Press【B】/【C】key to choose the value Tone-Burst tones:
4 tones available: 1750Hz / 2100Hz / 1000Hz / 1450Hz 【 D 】 / 【 # 】
52
Press【A】Key to move cursor to the menu
Press【B】/【C】key to choose the value
DTMF tone encoding time:
10 parameters including 50Microseconds, 100Ms, 150Ms,
200Ms, 250Ms,300Ms, 350Ms, 400Ms, 450Ms, and 500Ms 【 D 】 / 【 # 】
52
Press【A】Key to move cursor to the menu
Press【B】/【C】key to choose the value Beep sound audio levels:
5 levels from 1 to 5 【 D 】 / 【 # 】
53
Press【A】Key to move cursor to the menu
Press【B】/【C】key to choose the value Priority scan channel setup:
Select one from available programmed channels
OFF: Disable Priority Channel 【 D 】
/
【 # 】
53
Press【A】Key to move cursor to the menu
Press【B】/【C】key to choose the value Battery-voltage display (approx)
Display current battery voltage 【 D 】 / 【 # 】
54
Press【A】Key to move cursor to the menu
Press【B】/【C】key to choose the value
Perform RESET
FACT? : Resume Factory Default, erasing the memory
channels
INIT? : Resume General Setting, keeping memory channel
programming
OFF: Cancels reset
【 D 】 / 【 # 】 54
KEY OPERATIONS / QUICK CHART