Alinco DJ-A10 - Manual (Page 63)

Professional
FM Transceiver 45
Voice Prompt
English Voice-guidance is available. Key touch and some other major operations are assisted with
English voice.
1.Press and hold【PF2】key while turning on the radio, and keep pressing
【PF2】key for 3 seconds to enter into the Set Mode operations.
2.Press【B】/【C】key to choose the Menu 1 and display “
VOICE ”.
3.Press【A】key then press【B】key or【C】key to choose the parameter.
OFF: Voice prompting is disabled.
ENG: English guidance activated. Default is OFF.
SET MODE OPERATIONS
Set Mode Setting
The Set mode is used to customize the various operational parameters of DJ-A10. The Set Mode
parameters are stored and remain until next change regardless of power on/off operation. Set Mode
Setting operation is as follows and common to all available menus:
1.Press and hold【PF2】key while turning on the radio, and keep pressing【PF2】key for 3 seconds
to enter into the Set Mode operations.
2.Press【B】/【C】key to choose the menu.
3.Press【A】key to enter to the setup mode.
4.Press【B】key or【C】key to choose the desired parameter.
5.Press【D】key or【#】key to confirm and exit.