Alinco DJ-A10 - Manual (Page 67)

Professional
FM Transceiver 49
LCD Backlight operation
Always lit, turned off and automatic are available as LCD illumination operation
mode.
1.Press and hold【PF2】key while turning on the radio, and keep pressing
【 PF2】key for 3 seconds to enter into the Set Mode operations.
2.Press【B】/【C】key to choose the Menu 9 and display “ LIGHT ”.
3.Press【A】key then press【B】key or【C】key to choose the parameter.
AUTO: Automatic, turns on and off automatically. Default is AUTO.
SET MODE OPERATIONS
Battery Save
This function prevents useless battery consumption by switching the power ON/OFF at a fixed ratio if
there is no key operation or receiving signal for a continuous period of 5 seconds or more. Higher OFF
time (1:4 setting) saves more amount of battery but may cause slight delay on receiving. The Battery
Save function is temporarily suspended when a key is operated or a signal is received. The display
remain unchanged even the BS function is in the OFF cycle.
1.Press and hold【PF2】key while turning on the radio, and keep pressing
【PF2】key for 3 seconds to enter into the Set Mode operations.
2.Press【B】/【C】key to choose the Menu 8 and display “
SAVE ”.
3.Press【A】key then press【B】key or【C】key to choose the parameter from
3 ratios.1:1 / 1:2 / 1:4
OFF: Battery saving is disabled. Not recommended for normal operations. Default setting is 1:2.