Alinco DJ-A10 - Manual (Page 69)

Professional
FM Transceiver 51
5ST: When receives signal, scan stops for 5 seconds and resume.
10ST: Same, 10 seconds.
15ST: Same, 15 seconds and default is 10s.
Frequency/Channel Display Mode
There are 3 different display modes available, Frequency + Channel mode,
Channel mode and Channel+Name Tag modes.
1.Press and hold【PF2】key while turning on the radio, and keep pressing
【PF2】key for 3 seconds to enter into the Set Mode operations.
2.Press【B】/【C】key to choose the Menu 12 and display “
DSP ”.
3.Press【A】key then press【B】key or【C】key to choose the parameter.
FREQ: Frequency + Channel mode (VFO mode). Press【D】key to switch into
VFO mode.
CH: Channel mode. Note that manual setting is not available when the radio has
been preprogrammed by the dealer using software.
NAME: Channel+Name Tag mode(VFO mode). Press【D】key to switch into
VFO mode.
Default setting is FREQ.
Tone Burst Tone
Especially in Europe, Tone-burst tone operated repeaters are popular. To access to those repeaters,
SET MODE OPERATIONS