ARM Electronics MP13DVPDN - Manual (Page 11)

10
5.2 Hard Ceiling
The vandal proof IP Dome Camera can be installed directly on a wall or ceiling.
Please note that the wall or ceiling must have enough strength to support the IP
Dome Camera.
Follow the steps below to install your IP Dome Camera:
Step 1:
Unpack the vandal proof IP Dome Camera package and take out the IP
Dome Camera.
Step 2:
Use the supplied Security Torx to unscrew and open the dome cover.
Step 3:
Press both sides of the inner cover
and remove it from the Dome
Camera unit.
Step 4:
Press the sides of the snap-on
module, as indicated in the figure,
and detach it from the Dome Camera
housing.