ARM Electronics MP13DVPDN - Manual (Page 41)

40
7.3.8 Motion Detection
Motion Detection function allows detecting suspicious motion and triggering
alarms when motion volume in the detected area reaches/exceeds the
determined sensitivity threshold value.
In the Motion Detection setting page, there is a red frame right on the displayed
image and a motion indication window on the top of the image; see the figure
shown above. The red frame is for defining the motion detection area. To
change the size of the area, move the mouse cursor to the edge of the red
frame and draw it outward/inward. Move the mouse to the center of the red
frame can shift the frame to the intended location. As for the motion indication
window, when motion is detected, signals will be shown in it.
Detailed settings of Motion Detection are described as follows:
Active Motion Detection
You will be able to turn on/off Motion Detection in this section. Default setting is
Off.