ARM Electronics MP13DVPDN - Manual (Page 38)

37
Action (Multi-option)
The Administrator can specify alarm actions that will take when the alarm is
triggered. All options are listed as follows:
• Enable Alarm Output
Select the item to enable alarm relay output.
• Send Alarm Message by FTP/E-Mail
The Administrator can select whether to send an alarm message by
FTP and/or E-Mail when an alarm is triggered.
• Upload Image by FTP
Select this item, and the Administrator can assign a FTP site and
configure various parameters as shown in the figure below. When the
alarm is triggered, event images will be uploaded to the appointed FTP
site.
• Upload Image by E-Mail
Select this item, and the Administrator can assign an e-mail address
and configure various parameters as shown in the figure below. When
the alarm is triggered, event images will be sent to the appointed e-mail