ARM Electronics MP13DVPDN - Manual (Page 17)

16
STEP 5:
Connect the power and Ethernet cables to their connectors on the Dome
Camera unit.
STEP 6:
Attach the snap-on module into the Dome Camera housing.
STEP 7:
Adjust the camera to a desired angle. Please refer to the last section for
illustration.
Step 8:
Rotate the lens to adjust the camera's zoom level and focal length. Please
refer to the last section for details.
STEP 9
:
Determine the camera settings. Please refer to Chapter 6. Accessing
Camera.
STEP 10 :
Put the inner cover back to the camera unit.
STEP 11
:
Screw the housing cover to the dome body with the Security Torx.