Eneo EDC-4222B - Manual (Page 24)

Follow steps below to store the Preset positions:
1. Press the PRST key to enter the preset menu directly. Or press the MENU key to display the
main menu on the monitor. Scroll to preset and push the Joystick to the right.
2. Select the “Number” and select the preset position to be stored by pushing the Joystick up,
down, right, or left.
3. Follow the procedure of the auto scan above to edit titles.
4. If selected preset number is not empty, “Already exist preset” message will be displayed on the
monitor and select the “OK” and push the Joystick to the right to overwrite.
5. After selecting a preset position, press and hold CTRL, Use the Joystick to control the
direction of the camera and lens.
6. After aiming the camera (view direction and lens control), release CTRL.
7. Select “Event Function” and pushing the Joystick left or right. Then the event function
setup displays.
18