Eneo EDC-4222B - Manual (Page 27)

Function : Choose a function (None, Motion, Tracking, Cross, Area, Absent).
Classification : Choose a object to detect in Motion, Cross and Area (All, Human, Vehicle)
Output
: Set the alarm output. (Off, Out1~Out4)
Hold Time : Set the hold time of alarm signal for chosen function, (Off, 03 – 99 seconds)
3.5.2 Motion
You can detect moving objects in specified preset position.
You can see the results by either “Bounding Box” or “Trace”.
As a result of motion, screen will display the bounding box or trace.
(“Bounding box” means you can see a virtual rectangle on moving object. In prior of this, you
make sure that you set “On” in display and Bounding box in OSD Setup.
“Trace” means you can see a trace on moving object. In prior of this, you make sure that you set
“On” in display and Bounding box in OSD Setup.)
Sensitivity : Set the sensitivity step. 1-8 step, the lower number means the lower
sensitivity (dull).
Object Size : Set the min/max size.
21