Eneo EDC-4222B - Manual (Page 47)

You can see alarm signal when camera was tampered or camera focus was crumpled.
Tamper ON / OFF
Choose to enable or disable Tamper
Defocus ON / OFF
Choose to enable or disable Defocus
Hold Time Set the hold time of alarm signal for chosen function.
3.12.7 Camera Setup
SHARPNESS The higher the value, the more edges in the picture will be
enhanced (0~15)
RESOLUTION Select resolution mode. (LOW / MID / HIGH)
DIGITAL ZOOM OFF: Zoom range is limited to the optical.
2X: Zoom is extendable up to 2X of digital range.
4X: Zoom is extendable up to 4X of digital range.
8X: Zoom is extendable up to 8X of digital range.
MAX: Zoom is extendable Max digital zoom range.
IMAGE FLIP This function turns the video output from the camera upside down and
reverses it horizontally.
This option is helpful to install in the opposite side.
PRESET FREEZE ON: the image is frozen during calling Preset.
STABILIZATION ON: To increase the stability of an image from frame-to-frame jitter with
shaking.
2DNR(1), 2DNR(2) Select 2D noise reduction level (OFF / 001~007)
3DNR(1), 3DNR(2) Select 3D noise reduction level (AUTO / 001~028)
NOTE: DNR(1) applied when motor stopped. DNR(2) applied when motor moving.
41