Eneo EDC-4222B - Manual (Page 29)

Set Area : Locate the cursor on the “Set Area” and then twist Joystick and then move
Green grid to the position. Change the color of grid to disable Motion
Detection by twisting Joystick. Then disabled Grid will be changed to
Yellow color. (Default color of grid is Blue)
Clear Area : Locate the cursor on the “Clear Area” and then twist Joystick and then
move Green grid to the position. Change the color of grid to enable Motion
Detection by twisting Joystick. Then enabled grid will be changed to Blue
color.
All Set : Select All grids and change to Motion Detection disabled grid.
All Clear : Select All grids and change to Motion Detection enabled grid.
Note : We recommend setting Exclusion Areas for certain zones with unwanted motion.
(For example, swaying branches or leaves of tree, flickering monitor screen)
3.5.3
.
Tracking
You can make a camera follow the moving object automatically (In case of catching more than 1
moving objects at the same time, a bigger object will be tracked)
Zoom Enable : Set to enable or disable linked zoom capability during tracking.
23