Eneo EDC-4222B - Manual (Page 37)

6. You can also overwrite the programmed number and to remove a stored number from the
Tour, press the HOME key on the stored number, a blank position mark (---) will be
displayed.
7. Repeat Step 2 through 5 for each desired position. Each title will be displayed on top of the
line.
8. To edit the title, follow the procedure of the auto scan above to edit titles
9. Select Save and Exit and push the Joystick to the right. Press ESC to exit the program
without saving.
You can expand the Tour sequence by calling other programmed tours.
Note : The speed applies in the vector mode only.
Note : In the Tour mode, in conjunction with preset and Auto Scan, you can make the camera
travel from a preset position to another preset position at a specific speed.
Example: Preset 001>002>003>004>005>006, Auto Scan 01 starts at preset 002, ends at
preset 003, Auto Scan 02 starts at preset 005, ends at preset 006; Tour 001, 002, A01, 004,
A02.
31