Eneo EDC-4222B - Manual (Page 60)

3.22 Data Management
FACTORY DEFAULT
Select the Factory Default to initialize the Data.
ERASE PROGRAMMED DATA
Erase all stored data from the Flash-ROM of the selected dome camera. You will be asked
to enter ON or OFF. If you desire to erase all data then select the Erase Run, otherwise
press the ESC key to exit without erasing. The erased data includes all stored data (auto
scan, presets, and tours….) except origin offset.
The offset value is still valid after all data is erased. The offset value can be zero with default
set of Offset origin menu.
AUTO SCAN
: ON (Auto scan erase) / OFF
AREA TITLE : ON (Area title erase) / OFF
PRESET : ON (Preset erase) / OFF
PRIVACY ZONE : ON (Privacy zone erase) / OFF
54