Eneo EDC-4222B - Manual (Page 55)

3. Set the left limit by pushing the Joystick to the left.
4. Set ENABLE to ON to use
To exchange the right and the left limit, set SWAP to ON.
To apply limits on the auto pan (endless panning), set AUTO PAN to ON.
Note : When you use the panning range, we recommend using the flip mode to AUTO. When the flip
mode is 90
°, 100°, 110° or 120° and you moves over 90° vertically, the panning range operates in
opposite side.
TILT RANGE
When the dome camera is installed near a corner, tilt range can be limited by user.
Enable
: ON / OFF
High Limit : Set 0.0 ~ 180.0
Low Limit : Set 0.0 ~ 180.0
3.18 Origin Offset
This feature is useful to align a new dome camera exactly the same as the previously installed
dome camera.
49