Rack-mounting clearance requirements – H3C Technologies H3C S9800 Series Switches User Manual
Page 16
8
Figure 9 Left adjustable slide rail
(1) Front mark
(2) Guide rail
(3) Installation hole
Rack-mounting clearance requirements
Table 3 Rack-mounting clearance requirements
Model Router
dimensions
Rack requirements
S9804
•
Height—88.1 mm (3.47 in) (2 RU).
•
Width—440 mm (17.32 in).
•
Total depth—876 mm (34.49 in).
{
720 mm (28.35 in) for the chassis.
{
90 mm (3.54 in) for the cable
management bracket at the chassis
front.
{
66 mm (2.60 in) for the components at
the chassis rear.
•
IEC-compliant.
•
A minimum of 1 m (3.28 ft) in depth.
•
607 mm (23.90 in) to 1014 mm (39.92 in)
between the front and rear rack posts.
•
A minimum of 100 mm (3.94 in) between
the front rack post and the front door.
•
A minimum of 840 mm (33.07 in)
between the front rack post and the rear
door.
S9810
•
Height—220 mm (8.66 in) (5 RU).
•
Width—440 mm (17.32 in).
•
Total depth—807.1 mm (31.78 in).
{
760 mm (29.92 in) for the chassis.
{
21.1 mm (0.83 in) for the card ejector
levels at the chassis front.
{
26 mm (1.02 in) for the components at
the chassis rear.
•
IEC-compliant.
•
A minimum of 1 m (3.28 ft) in depth.
•
630 mm (24.80 in) to 900 mm (35.43 in)
between the front and rear rack posts.
•
A minimum of 100 mm (3.94 in) between
the front rack post and the front door.
•
A minimum of 840 mm (33.07 in)
between the front rack post and the rear
door.