Do the following as shown in, Figure 23 – H3C Technologies H3C S9800 Series Switches User Manual
Page 25
Advertising
17
Figure 23 Attaching the slide rail to the cage nuts with screws
(1) Compress the slide rail, making sure the positioning tabs are inserted into the square holes
(2) Install fastening screws
TIP:
Install a screw in each mounting hole of the slide rail to ensure its weight bearing capacity.
5.
Repeat step 4 to install the other slide rail. Make sure the two slide rails are at the same height so
the device can be placed on them horizontally.
Advertising