Verifying the installation – H3C Technologies H3C S9800 Series Switches User Manual
Page 39
Advertising
31
Figure 38 Installing an LPU on the S9804 switch
(1) LPU-pushing direction
(2) Ejector lever-closing direction
(3) Screw-tightening direction
Figure 39 Installing an LPU on the S9810 switch
(1) LPU-pushing direction
(2) Ejector lever-closing direction
(3) Screw-tightening direction
Verifying the installation
After you complete the installation, verify that:
•
There is enough space for heat dissipation around the switch.
•
The grounding cable is connected correctly.
•
The power modules are as required.
•
The power cords are connected correctly.
Advertising