Troubleshooting ipv6 basics configuration, Symptom, Solution – H3C Technologies H3C S7500E Series Switches User Manual

Page 147

Advertising
background image

13-28

Reply from 3001::1

bytes=56 Sequence=1 hop limit=64 time = 2 ms

--- 3001::1 ping statistics ---

1 packet(s) transmitted

1 packet(s) received

0.00% packet loss

round-trip min/avg/max = 2/2/2 ms

[SwitchB] ping ipv6 -c 1 2001::15B:E0EA:3524:E791

PING 2001::15B:E0EA:3524:E791 : 56 data bytes, press CTRL_C to break

Reply from 2001::15B:E0EA:3524:E791

bytes=56 Sequence=1 hop limit=63 time = 3 ms

--- 2001::15B:E0EA:3524:E791 ping statistics ---

1 packet(s) transmitted

1 packet(s) received

0.00% packet loss

round-trip min/avg/max = 3/3/3 ms

As shown in the output information, Switch B can ping Switch A and Host.

Troubleshooting IPv6 Basics Configuration

Symptom

The peer IPv6 address cannot be pinged.

Solution

z

Use the display current-configuration command in any view or the display this command in

system view to verify that IPv6 is enabled.

z

Use the display ipv6 interface command in any view to verify that the IPv6 address of the

interface is correct and the interface is up.

z

Use the debugging ipv6 packet command in user view to enable the debugging for IPv6 packets

to help locate the cause.

Advertising