Configuration verification – H3C Technologies H3C S7500E Series Switches User Manual

Page 193

Advertising
background image

15-36

<SwitchB> system-view

[SwitchB] ipv6

# Configure an IPv6 address for VLAN-interface 100.

[SwitchB] interface vlan-interface 100

[SwitchB-Vlan-interface100] ipv6 address 2002:3::1 64

[SwitchB-Vlan-interface100] quit

# Configure an IPv6 address for VLAN-interface 101.

[SwitchB] interface vlan-interface 101

[SwitchB-Vlan-interface101] ipv6 address 2002::22:1 64

[SwitchB-Vlan-interface101] quit

# Create the interface tunnel 2.

[SwitchB] interface tunnel 2

# Configure an IPv6 address for the interface tunnel 2.

[SwitchB-Tunnel2] ipv6 address 3001::1:2 64

# Configure the tunnel encapsulation mode.

[SwitchB-Tunnel2] tunnel-protocol ipv6-ipv6

# Configure the source address for the interface tunnel 2 (IP address of VLAN-interface 101)

[SwitchB-Tunnel2] source 2002::22:1

# Configure the destination address for the interface tunnel 2 (IP address of VLAN-interface 101 of

Switch A).

[SwitchB-Tunnel2] destination 2002::11:1

[SwitchB-Tunnel2] quit

# Create service loopback group 1 to support the tunnel service.

[SwitchB] service-loopback group 1 type tunnel

# Add GigabitEthernet 2/0/3 to service loopback group 1.

[SwitchB] interface GigabitEthernet 2/0/3

[SwitchB-GigabitEthernet2/0/3] undo stp enable

[SwitchB-GigabitEthernet2/0/3] port service-loopback group 1

[SwitchB-GigabitEthernet2/0/3] quit

# Reference service loopback group 1 on the tunnel.

[SwitchB] interface tunnel 2

[SwitchB-Tunnel2] service-loopback-group 1

[SwitchB-Tunnel2] quit

# Configure a static route from Switch B through the interface tunnel 2 to Group 1.

[SwitchB] ipv6 route-static 2002:1:: 64 tunnel 2

Configuration verification

After the above configuration, display the status of the tunnel interfaces on Switch A and Switch B,

respectively.

<SwitchA> display ipv6 interface tunnel 1 verbose

Tunnel1 current state :UP

Line protocol current state :UP

IPv6 is enabled, link-local address is FE80::2013:1

Global unicast address(es):

3001::1:1, subnet is 3001::/64

Joined group address(es):

FF02::1:FF13:1

FF02::1:FF01:1

Advertising