H3C Technologies H3C S7500E Series Switches - Manual (Page 78)

7-1
7
DHCP Client Configuration
When configuring the DHCP client, go to these sections for information you are interested in:
z Introduction to DHCP Client
z Enabling the DHCP Client on an Interface
z Displaying and Maintaining the DHCP Client
z DHCP Client Configuration Example
When multiple VLAN interfaces with the same MAC address use DHCP for IP address acquisition via
a relay agent, the DHCP server cannot be a Windows 2000 Server or Windows 2003 Server.
Introduction to DHCP Client
With the DHCP client enabled, an interface will use DHCP to obtain configuration parameters such as
an IP address from the DHCP server.
Enabling the DHCP Client on an Interface
Follow these steps to enable the DHCP client on an interface:
To do… Use the command… Remarks
Enter system view system-view —
Enter interface view interface interface-type interface-number —
Enable the DHCP client on the
interface
ip address dhcp-alloc [ client-identifier
mac interface-type interface-number ]
Required
Disabled by default.