Upgrading software from the cli – H3C Technologies H3C S7500E Series Switches User Manual
Page 11
10
Upgrading software from the CLI
NOTE:
Make sure the upgrade files exist in the root directory of the storage medium of the active and standby
MPUs of the IRF fabric.
Perform the following tasks as needed:
•
•
•
1.
Upgrade Boot ROM
# Upgrade the Boot ROM program of the active MPU of the IRF fabric.
<Sysname> bootrom update file flash:/newest.btw chassis 1 slot 0
This command will update bootrom file on the specified board(s),
Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in chassis 1 slot 0.
# Upgrade the Boot ROM program of each standby MPU of the IRF fabric.
{
On the standby MPU in slot 1 of member device 1
<Sysname> bootrom update file chassis1#slot1#flash:/newest.btw chassis 1 slot 1
This command will update bootrom file on the specified board(s), Continue?
[Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in chassis 1 slot 1.
{
On the standby MPU in slot 0 of member device 2
<Sysname> bootrom update file chassis2#slot0#flash:/newest.btw chassis 2 slot 0
This command will update bootrom file on the specified board(s), Continue?
[Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in chassis 2 slot 0.
{
On the standby MPU in slot 1 of member device 2
<Sysname> bootrom update file chassis2#slot1#flash:/newest.btw chassis 2 slot 1
This command will update bootrom file on the specified board(s), Continue?
[Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in chassis 2 slot 1.
# Reboot the IRF fabric to validate the upgrade.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y