H3C Technologies H3C SecPath L1000-A Load Balancer - Manual (Page 19)

11
Figure 5 Marking the positions of the cage nuts
2. As shown in Figure 6 , insert one edge of a cage nut into the hole, and compress the other edge of
the cage nut to push the cage nut fully into the hole.
Figure 6 Installing cage nuts
3. Align the screw holes in one mounting bracket with the screw holes in the side panel of the
chassis, and use screws to attach the mounting bracket to the L1000-A, as shown in
Figure 7 .
Figure 7 Attaching the mounting brackets
4. Supporting the bottom of the L1000-A with one hand, hold the L1000-A with the other hand, and
slide the L1000-A into the rack.