H3C Technologies H3C SecPath L1000-A Load Balancer - Manual (Page 38)

30
2. Enter the system name for the L1000-A.
3. Click Apply.
Configuring the username and password
1. Select System > User from the navigation tree.
Figure 28 Local user
2. Click Add.
Figure 29 Adding a local user
3. Configure the local user, as described in Table 6 .
4. Click Apply.
Table 6 Configuration items
Item Description
User Name
Enter the username of the local user.
The username can contain spaces in the middle. However, the device ignores
any leading spaces in the username.