H3C Technologies H3C SecPath L1000-A Load Balancer - Manual (Page 65)

57
The interface module comes with each SFP port covered by a dust cap. For simplicity, this figure does
not show the dust caps.
Table 24 NSQ1GP4U0 interface specifications
Item Description
Connector type LC
Transceiver module type SFP
Number of interfaces 4
Compliant standards 802.3, 802.3u, and 802.3ab
Frame format
Ethernet_II
Ethernet_SNAP
Interface rate 1000 Mbps
Optical
transmit
power
Type
Short-haul
multimode Medium-haul
single-mode
Long-haul Long-haul
Ultra-long
haul
Min –9.5 dBm –9 dBm –2 dBm –4 dBm –4 dBm
Max 0 dBm –3 dBm 5 dBm 1 dBm 2 dBm
Receiving sensitivity –17 dBm –20 dBm –23 dBm –21 dBm –22 dBm
Central wavelength 850 nm 1310 nm 1310 nm 1550 nm 1550 nm
Fiber type
62.5/125
μm multimode
fiber 9/125 μm
single-mode
fiber 9/125 μm
single-mode
fiber 9/125 μm
single-mode
fiber 9/125 μm
single-mode
fiber
Maximum transmission
distance 0.55 km
(0.34 miles) 10 km (6.21
miles) 40 km (24.86
miles) 40 km (24.86
miles) 70 km (43.50
miles)
NSQ1XS2U0
NSQ1XS2U0 provides two 10-GE SFP+ fiber ports, which can be set to operate as Layer 2 or Layer 3
interfaces.
Figure 44 NSQ1XS2U0 panel view
(1) Captive screw (2) SFP+ port
The interface module comes with each SFP+ port covered by a dust cap. For simplicity, this figure does
not show the dust caps.
Table 25 NSQ1XS2U0 interface specifications
Item Description
Connector type LC