H3C Technologies H3C SecPath L1000-A Load Balancer User Manual
Page 43
35
Figure 32 Static NAT
2.
In the Static Address Mapping area, click Add to enter the Add Static Address Mapping page.
Figure 33 Adding static address mapping
3.
Configure a static address mapping as described in
4.
Click Apply.
Table 8 Configuration items
Item Description
Internal VPN Instance
Specify a name of the VPN instance to which the internal IP addresses belong.
If no internal VPN instance is specified, this indicates that the internal address is
a common private network address.
Internal IP Address
Enter an internal IP address for the static address mapping.
Global VPN Instance
Specify a name of the VPN instance to which the external IP addresses belong.
If no global VPN instance is specified, this option indicates that the external
address is a common public network address.
Global IP Address
Enter a public IP address for the static address mapping.
Network Mask
Specify the network mask for internal and public IP addresses.
If the network mask is specified, net-to-net static NAT is implemented. If no
network mask is specified, the default mask 255.255.255.255 is used. In this
case, one-to-one static NAT is delivered.
ACL
Set an ACL ID for the static NAT policy.