H3C Technologies H3C SecPath L1000-A Load Balancer - Manual (Page 66)

58
Item Description
Transceiver module type SFP+
Number of interfaces 2
Compliant standard 802.3ae
Physical layer 10GBASE-R/W
Interface speed LAN PHY mode: 10.3125 Gbps
Lightning protector for a network port (optional)
If part of the network cable of a network port must be routed outdoors, connect a lightning protector to
the cable before you plug the cable into the port.
The specifications for the lightning protector for a network port are as follows: 1000 M port protective
unit–single port, maximum discharge current (8/20μs waveform): 3 kA, output voltage: core-core < 15
V, core-ground < 350 V.
For how to install a lightning protector for a network port, see "
Installing a lightning protector for a
network port ."
Power strip with lightning protection (optional)
If part of the AC power line is routed outdoors, use a power strip with lightning protection to connect the
AC power cord of the device to the AC power line to protect the device from being damaged by
lightning strikes.
The specifications for the power strip with lightning protection are as follows: Maximum discharge
current: 6500 A, protection voltage: 220 VAC to 500 VAC.
For how to connect the AC power supply to a power strip with lightning protection, see "
Connecting the
AC power supply to a power strip with lightning protection ."