H3C Technologies H3C SecPath L1000-A Load Balancer - Manual (Page 55)

47
To reboot the L1000-A immediately:
Task Command Remarks
Reboot a card or the whole
system immediately.
reboot
Required.
Available in user view.
To configure the scheduled reboot function:
Task Command Remarks
Enable the scheduled reboot
function and specify a specific
reboot time and date.
schedule reboot at hh:mm [ date ]
Required.
Use either approach.
By default, the scheduled reboot
function is disabled.
Available in user view.
Enable the scheduled reboot
function and specify a reboot
waiting time.
schedule reboot delay { hh:mm |
mm }