H3C Technologies H3C SecPath L1000-A Load Balancer - Manual (Page 62)

54
Ports and slots
Table 19 Ports and slots
Item Description
Console port
1
9600 bps (default) to 115200 bps
USB port 1 (Host mode, reserved without software support)
Combo interfaces
(fiber/copper ports) • Twelve 10/100/1000 Mbps copper ports: GE0 through GE11
• Twelve 1000 Mbps fiber ports: SFP0 through SFP11
Interface module slots 2
Power module slots 2
Console port
Table 20 Console port specifications
Item Description
Connector type RJ-45
Interface standard RS-232
Baud rate 9600 bps (default) to 115200 bps
Maximum transmission distance 15 m (49.21 ft)
Services
• Connection to an ASCII terminal
• Connection to the serial interface of a local PC to run the
terminal emulation program
• Command line interface (CLI)
Combo interfaces
• Copper Ethernet ports
Table 21 Technical specifications for copper Ethernet ports
Item Specification
Connector RJ-45
Compliant standards 802.3, 802.3u, and 802.3ab
Port
Autosensing (the Ethernet port does not support MDI/MDIX autosensing
when operating in forced mode)
Frame format
Ethernet_II
Ethernet_SNAP
Transmission medium and
max transmission distance 100 m (328.08 ft) over category-5 or higher twisted pair cable
Rate and duplex mode
10 Mbps autosensing Half/full-duplex auto-negotiation
100 Mbps autosensing Half/full-duplex auto-negotiation
1000 Mbps autosensing Full-duplex auto-negotiation