Bang & Olufsen BeoVision 10 User Guide - Manual (Page 10)

10
In the AV menus you can select how a
PUC controlled product is connected.
You can choose between ‘PLUG’ (cable)
and ‘IR’ (IR Blaster).
IR-transmitters: To operate non-Bang &
Olufsen products with a Bang & Olufsen
remote control, attach a Bang & Olufsen IR-
transmitter to each of the products. Connect
each transmitter to the corresponding socket
marked PUC on the main connection panel.
>> Connections
The CA module is a ‘card reader’ for your
Smart Card which decodes the coded
signals sent out by the programme
provider.
The CA module has one protruding edge on
one side and two protruding edges on the
other side. The side with two edges should
face upwards.
When inserting a card, the gold chip should
face away from the screen.
IR type
DVB module
STB
STB
PLUG
IR
SMARTCARD
PCMCIA