Bang & Olufsen BeoVision 10 User Guide - Manual (Page 30)

30
Your television has a built in
Sleep Timer which means that
you can make it switch off after
a designated number of minutes.
Also you can make the television
react to a Timer Play programmed
on an Audio or Video Master
connected to the television via
Master Link.
If the Timer Play source is DTV,
settings must be made in the
DTV PLAY TIMER menu.
You can also make standby
settings for your television to
switch itself off after some time
with no operation.
Set POWER SAVNG to OFF, if you
have other equipment connected
to your television.
NOTE! For safety reasons, the stand
will not turn if the TV is switched on
by a Play Timer.
Set the television to switch itself on or off
Play Timer
If you connect a Bang & Olufsen audio
or video product to your television with
a Master Link cable, you can exclude or
include it in timed functions via the
PLAY TIMER menu. For example, set the
television Play Timer to ON and an audio
system’s Play Timer to OFF if you wish
timed functions to apply only to the
television.
To switch on the Play Timer …
> Press MENU to bring up the TV SETUP
menu and highlight PLAY TIMER.
> Press the centre button to bring up the
PLAY TIMER menu, and highlight TIMER
ON/OFF.
> Press the centre button to bring up the
TIMER ON/OFF menu.
> Use the navigation button left or right to
reveal ON.
> Press the centre button to store the
setting.
For further information about how to
program Timers and switch the Play Timer
on or off for a connected Bang & Olufsen
audio or video product, see the guide
enclosed with the product.
Sleep Timer
You can make the television switch off
automatically after a number of minutes.
To activate the Sleep Timer with
Beo4* 1 …
> Press LIST and use the navigation button
up or down to bring up SLEEP in the Beo4
display.
> Press the centre button repeatedly to
select the number of minutes.
To deactivate the Sleep Timer …
> Press LIST and use the navigation button
up or down to bring up SLEEP in the Beo4
display.
> Press the centre button repeatedly until
OFF is shown in the television display.
To activate the Sleep Timer with Beo6 …
> Press Sleep and select the number of
minutes or Off.
To set the Sleep Timer via the menu …
> Press MENU to bring up the TV SETUP
menu and highlight SLEEP TIMER.
> Press the centre button to bring up the
SLEEP TIMER menu.
> Press the centre button repeatedly to
switch between the number of minutes
and OFF.
1 *If you have a Beo4 without navigation
button, SLEEP may not be available.