Bang & Olufsen BeoVision 10 User Guide - Manual (Page 7)

7
Set positions for the television to turn to
If your television is equipped
with the optional motorised
stand, you can turn it using the
remote control.
Furthermore, you can program
the television to turn
automatically to face your
favourite viewing position when
you switch on the television. It
can turn to a different position
when you listen to, for example,
a connected radio, and turn
away to a standby position when
you switch it off.
You can also turn your television
by hand.
NOTE! For information about first-
time installation of the motorised
stand, see Getting Started.
Choose one position for when you
switch the television on, one for audio
mode, and one for when you switch it off.
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight STAND
POSITIONS.
> Press the centre button to bring up the
STAND POSITIONS menu.
> Press the centre button to determine the
VIDEO position.
> Use and to turn the television and
place it according to your viewing position.
> Press the centre button to store the
position.
To store a stand position for when an
audio source is switched on from the
television …
> Highlight AUDIO.
> Press the centre button to determine the
AUDIO position.
> Use and to turn the television and
place it as you wish.
> Press the centre button to store the
position.
To store a stand position for when the
television is switched off and in
standby …
> Highlight STANDBY.
> Press the centre button to determine the
STANDBY position.
> Use and to turn the television and
place it as you wish.
> Press the centre button to store the
position.
> During first-time setup, press the green
button to continue first time-setup,
otherwise …
> …press and hold BACK to leave all menus.
STAND POSITIONS
VIDEO
AUDIO
STANDBY