Bang & Olufsen BeoVision 10 User Guide - Manual (Page 14)

14
Standby options …
When you register a non-Bang & Olufsen
product in the CONNECTIONS menu, you
can also select different STANDBY OPTIONS
for your product. This means that you can
select if the connected product should
switch to standby automatically.
The options are:
OFF AT SOURCE CHANGE … The product
switches to standby immediately when
you select another source.
OFF AT TV STANDBY … The product
switches to standby when you switch the
television to standby.
ALWAYS ON … The television does not
switch the product to standby, but the
product may switch to standby due to its
own settings.
MANUAL CONTROL …The product can only
be switched on and off by means of the
remote control. For further information,
see page 39 .
>> Register additional video equipment