Bang & Olufsen BeoVision 10 User Guide User Manual

Page 43

Advertising
background image

43

System modulator

If you have an audio setup, such as a
BeoLink Active/Passive, and you choose
to set up a non-linkable television in the
same room, you must set the sys tem
modulator to ON. The factory setting is

AUTO, which must be used if you are

using a linkable Bang & Olufsen television.

To switch on the system modulator …

> Bring up the TV SETUP menu and highlight

OPTIONS.

> Press the centre button to bring up the

OPTIONS menu and highlight
CONNECTIONS.

> Press the centre button to bring up the

CONNECTIONS menu, and highlight LINK

TUNING.

> Press the centre button to bring up the

LINK TUNING menu and highlight
MODULATOR.

> Use the navigation button left or right to

reveal ON.

> Press the centre button to store the

setting, or …

> … press and hold BACK to leave all menus

without storing.

>> Distribute sound and picture with BeoLink

Link frequency

If, for example, a TV channel in your
area is broadcasted on the same
frequency as the factory setting for the
BeoLink system; 599 MHz, you must tune
the system modulator to an unoccupied
frequency. When you change the link
frequency in the main room television,
make sure that the link frequency in the
link room television corresponds to it.

To change the link frequency …

> Bring up the TV SETUP menu and highlight

OPTIONS.

> Press the centre button to bring up the

OPTIONS menu and highlight
CONNECTIONS.

> Press the centre button to bring up the

CONNECTIONS menu, and highlight LINK

TUNING.

> Press the centre button to bring up the

LINK TUNING menu and highlight
FREQUENCY.

> Use the navigation button left or right to

find an unused frequency.

> Press the centre button to store the

setting, or …

> … press and hold BACK to leave all menus

without storing.

The LINK TUNING menu.

The LINK FREQUENCY menu.

When tuning in the link frequency in the link

room, a test image is shown. FINE TUNE is
only available in link room/Option 4 setups.

LINK TUNING

FREQUENCY 599
TV SYSTEM

B/G

MODULATOR AUTO

LINK TUNING

FREQUENCY 599
FINE TUNE

0

TV SYSTEM

B/G

Advertising
This manual is related to the following products: