Bang & Olufsen BeoVision 10 User Guide - Manual (Page 27)

27
Adjust volume, bass or treble
Sound settings are preset at the factory
to neutral values which suit most
listening situations. However, if you
wish, you can adjust these settings to
your liking.
You can preset levels for sound volume,
bass, treble and a subwoofer.
You can switch the loudness feature on
or off. The loudness feature compensates
for the human ear’s lack of sensitivity to
high and low frequencies. These
frequencies are boosted at low volume
levels so that low music becomes more
dynamic.
In addition, you can select two default
speaker combinations; one to be used
each time you switch on a video source
in your television, and one to be used
each time you switch on an audio source
connected to your television. You can
still select a different speaker
combination any time you wish.
For further information about speaker
combinations,
see page 28 .
To adjust sound …
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight SOUND.
> Press the centre button to bring up the
SOUND SETUP menu, and highlight
ADJUSTMENT.
> Press the centre button to bring up the
SOUND ADJUSTMENT menu.
> Use the navigation button up or down to
select an item to adjust.
> Use the navigation button left or right to
adjust the values or choose a setting.
> Press BACK to store your settings until you
switch off your television, or …
> … press the centre button to store your
settings permanently.
The content of the SOUND menu varies
according to what you have connected to
the television.
>> Adjust picture and sound settings
SOUND ADJUSTMENT
VOLUME .... . . . .
BASS .... . . . .
TREBLE .... . . . .
SUBWOOFER .... . . . .
LOUDNESS ON
DEFAULT VIDEO SPEAKER3
DEFAULT AUDIO SPEAKER2