Bang & Olufsen BeoVision 10 User Guide - Manual (Page 21)

21
Add Power Link speakers and a
BeoLab subwoofer to your
television and you have a
surround sound system.
A surround sound setup fits
easily into your living room. Let
the picture determine your ideal
viewing and listening position.
You get the best sound
experience in the area created by
the speakers.
Switch on the television before you
adjust speaker settings.
To register the speaker types …
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight SOUND.
> Press the centre button to bring up the
SOUND SETUP menu and highlight
SPEAKER TYPE.
> Press the centre button to bring up the
SPEAKER TYPE menu and use the
navigation button left or right to reveal
your speaker type.
> Press the navigation button down to move
to the next speaker and use the navigation
button left or right to reveal your speaker
type.
> Press the centre button to store or press
BACK to leave the menu without storing.
Loudspeaker setup – BeoVision 10-40/46
Select your speaker types
SPEAKER TYPE
FRONT BEOLAB 8000
REAR BEOLAB 4000
SUBWOOFER YES