Bang & Olufsen BeoVision 10 User Guide - Manual (Page 18)

18
>> Edit tuned TV channels
You can store TV channels on channel
numbers of their own. Fine tune the
channel reception, indicate the presence
of coded channels and choose
appropriate sound types for the
individual channels.
> Bring up the TV SETUP menu and highlight
TUNING.
> Press the centre button to bring up the
TUNING menu and highlight MANUAL
TUNING.
> Press the centre button to bring up the TV
MANUAL TUNING menu.
> Use the navigation button up and down to
move between the items in the menu.
> Use the navigation button left and right to
view your choices for each item.
> If you choose NAME, then press the
green button to start the naming
procedure. Use the navigation button up
and down to enter the characters in the
name you choose. Use the navigation
button left and right to move between the
characters in the name.
> When you have finished editing, press the
centre button to accept the settings.
> Press the centre button to store the
adjusted channel.
> Press and hold BACK to exit all menus.
If the item TV SYSTEM appears on the menu,
then make sure that the correct broadcast
system is displayed before you begin tuning:
B/G … for PAL/SECAM BG
I …
for PAL I
L … for SECAM L
M … for NTSC M
D/K … for PAL/SECAM D/K
If channels are broadcasted with two
languages and you want both languages,
you can store the channel twice, once with
each language.
Even though you store a type of sound/
language, you can switch between the various
types while watching a TV programme.
Adjust tuned channels
TV MANUAL TUNING
FREQUENCY 217
CHANNEL NO.
7
NAME DR 1
FINE TUNE 0
DECODER OFF
TV SYSTEM
PAL/BG
SOUND STEREO