Bang & Olufsen BeoVision 10 User Guide - Manual (Page 15)

15
Camera and headphones sockets
You can connect headphones
and listen to a programme, or
you can connect a Camcorder
and watch your home movies on
the tele vision.
Remove the cover to access the camera
and headphones sockets. To remove
the cover, press at the right or left
side of the cover and you can easily
flip it off.
PHONES
You can connect stereo headphones to the
socket marked PHONES.
– When the sound in the speakers is not
muted, volume adjustment is directed at
the speakers.
– To mute the speakers connected to the
television, press the middle of the
button.
– When sound is muted in the speakers,
press or to adjust sound in
headphones.
– To restore sound in the speakers, press the
middle of the button.
Note! Prolonged listening at high volume
levels can cause hearing damage!
R – L
For audio connection (right and left sound
channel respectively).
VIDEO
For connection of the video signal.
Sockets for temporary connections
The illustration shows placement of camera
and headphone sockets on BeoVision 10-32.
For placement of these sockets on
BeoVision 10-40/46, see the Getting Started.
Watch digital pictures on your television
To watch your camera pictures, connect the
camera to the AV5 socket(s) and switch the
television on. The tele vision auto matically
registers the signal and you can see the still
pictures or video clips on the screen.
To select the CAMERA input via Beo4 …
> Press LIST and use the navigation button
up or down to bring up CAMERA* in the
Beo4 display and press the centre button
to bring up the picture. (Beo6: Press
CAMERA).
*In order to display CAMERA on Beo4, you
must first add it to the Beo4 list of functions.
For further information, see the guide
enclosed with Beo4.
R L VIDEO PHONES
AV5 socket