Bang & Olufsen BeoVision 10 User Guide - Manual (Page 4)

4
If you have a Beo4 remote control
without navigation button, you must
use the ‘star’ to navigate up, down, left
and right in menus and press the centre
button to confirm choices and settings
in menus. Also your television must be
set up for use with a Beo4 without
navigation button. Bring up the TV SETUP menu by pressing
MENU while the TV is on.
To back up through menus, press STOP.
To exit menus, press EXIT.
Navigate in menus
If you have a Beo4 with navigation
button and your television is set up for
use with it,
see page 32 , you use the
centre button with up, down, left and
right movement to navigate in menus.
Press in the middle of the centre button
to confirm selections and settings in
menus.
Bring up the TV SETUP menu by pressing
MENU while the TV is on.
To back up through menus, press BACK.
To exit menus, press and hold BACK.
If your television is set up for use
without navigation button, you must
use the ‘star’ to navigate up, down, left
and right in menus and press the centre
button to confirm selections and
settings in menus.
Beo4 with navigation button
Beo4 without navigation button
Beo6
If you operate your television with the
Beo6 remote control, you use the centre
button with up, down, left and right
movement to navigate in menus. Press
in the middle of the centre button to
confirm selections and settings in menus.
Bring up the TV SETUP menu by pressing
Menu while the TV is on.
To back up through menus, press BACK.
To exit menus, press and hold BACK.
If your Beo6 is set up to be used without
navigation button, press STOP to back up
through menus and BACK to exit menus.
Note that a Beo6 should be reconfigured
when you add new products to your setup.
You can also operate your television with
Beo5 which is operated similarly to Beo6.
GO
ST
OP
PLA
Y
BA
CK