Eclipse - Fujitsu Ten AVX5000 - Manual (Page 127)

126
How to use the DVD player
How to operate the DVD player
Touch in the FUNC DVD
SETTING screen.
● Each time the switch is touched, the
screen size changes in the order
shown below.
● 16 : 9 (WIDE)
The video is displayed at normal width. DVD software recorded in 4 : 3 size will be
displayed with black left and right edges or will be expanded to the left and right.
● 4 : 3 (PS)
The video is displayed with right and left edges cut off. DVD software recorded in 4 : 3
size will be displayed exactly at screen size (4 : 3).
● 4 : 3 (LB)
The video is displayed with black upper and lower edges.
DVD software recorded in 4 : 3 size will be displayed exactly at screen size (4 : 3).
Touch .
Changing video output
Monitor
16 : 9
WIDE
4 : 3
PS
4 : 3
LB
BACK
There are no problems with using this function as long as the customer views
images privately in wide-screen format. However, if the images are compressed or
enlarged for viewing for any commercial or public purpose, it may infringe upon the
rights of the copyright holder under applicable copyright laws.
When another monitor such as a rear seat monitor is being used, the size of the
video being displayed in the rear seat monitor will differ according to the video
output size set by the deck (front).